You are here:Home»Access control system»RFID Reader»Proximity Card Reader»Proximity card reader, RFID reader Model: SW-CR01

Proximity card reader, RFID reader Model: SW-CR01

Place of Origin: Shenzhen,China(Mainland)
Minimum Order Quantity:1 Piece
Product Introduction
Proximity card reader, RFID reader.Frequency: 125 KHz/ 13.56 MHz.Protocol: wiegand 26, wiegand 34 or RS232 Standard Format Data Output.

Item name: Proximity cardreader, RFID reader.

Model: SW-CR01

Specification

Frequency: 125 KHz/ 13.56 MHz.

Protocol: wiegand 26, wiegand 34 or RS232 Standard Format Data Output.

Communication Distance:WG≤100M.

PVC Case Material.

Less than 0.2 secondResponse Speed .

Real Time Data Transfer.

Working Voltage: DC 9V-14V, Standard 12V.

Static Current: ≤120mA.

Proximity Range: 5-10CM.

Read Card type: SupportEM-ID/Mifare-ID.

AmbientTemperature: 070.

Ambient Humidity:10%90%.

More than 100M Communication Distance.

Dimension: 76 x 114x 16mm

Installation:

Using “+”type screw driver to loosen the screw betweenthe panel and motherboard. And then embed the motherboard to the side wall withthe plastic plug and screws.


Wire Connection:

RedDC 9V-14V

BlackGND

GreenD0

WhiteD1

BlueLED

YellowBEEP

Notice

1. Confirm the electric voltage (DC12V) anddifferentiate positive anode and cathode of power supply

2. When external Power is used,make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller ismore than 50m, pleaseuse Power Line with at least 1.5 square cm Dia, or using several parallelNetwork wires.